Machine Dog Food

Machine Dog Food

Motor: Siemens
Inverter: Delta
Electrical parts: Schneider
Certificate: ISO, CE, SGS, EAC
Warranty: one year
After sales service: On-site installation
Type: twin screw extruder
Automatic: full automatic
Send Inquiry
Description

Machine Dog Food Solutions

 

1. Description And Capacity Of Machine Dog Food

A pet food production line is an automated system integrating raw material processing, formula mixing, extrusion, drying, flavoring, and packaging. It is primarily used to produce compound feed for various pets, including dogs, cats, ornamental fish, birds, and small rodents. It can produce various forms of pet food, such as pellets, extruded feed, and filled feed, depending on the pet's breed, growth stage, and feeding needs. The entire process is standardized, continuous, and large-scale, ensuring the feed's nutritional uniformity, palatability, stability, and safety.

The design and configuration of the production line can be flexibly adjusted according to production capacity (small-scale laboratory/pilot-scale, medium-scale commercial, large-scale industrial), product type (extruded pet food as the mainstream, such as dog and cat staple food and pet snacks), and raw material characteristics (grains, meat, fruits and vegetables, additives, oils, etc.). It adheres to pet nutritional formula requirements, using precise raw material ratios and efficient processing technology to transform various raw materials into finished feeds that meet the digestive and absorption characteristics of pets. It is the core carrier of industrialized pet food production.

pet food extruder

 

Other Capacities for Choose:

  • 100-150kg/h
  • 200-250kg/h
  • 300-500kg/h
  • 600-800kg/h
  • 800-1000kg/h
  • 1200-1500kg/h
  • 1500-2000kg/h
  • 2000-3000kg/h
  • 3000-4000kg/h
  • 4000-5000kg/h
  • 9000-10000kg/h
  • 140000-15000kg/h

 

2. Video of Machine Dog Food

This pet food production line is based on extrusion technology, which better meets pet food's palatability and digestibility needs compared with ordinary livestock feed pelleting. The continuous line includes several key sections: Raw material pretreatment cleans, crushes and automatically batches ingredients via computer control to ensure accurate nutrition. In the mixing and conditioning section, materials are blended evenly and conditioned with steam, water and oil to improve plasticity. The core extrusion section uses high temperature (120–180℃) and pressure to gelatinize starch and denature protein. Various molds produce different shapes for diverse pets. Post-processing includes drying, cooling, coating with oil and enhancers, as well as crushing and grading to guarantee stable quality, long shelf life and good taste.

Packaging and storage stage: Qualified finished feed is measured, weighed, sealed, and labeled to complete bag/can packaging before being sent to the storage area. The entire process can be automated for palletizing, ensuring efficient storage.

3. Application Of Machine Dog Food

Dog and cat food production equipment is mainly used for the large-scale production of various types of extruded pet food. It can produce pellets of different shapes, densities, and palatability according to the pet's breed, age, and nutritional needs. The equipment is highly automated, capable of completing processes such as ingredient mixing, extrusion, drying, and coating. It is widely used in pet food processing plants, feed companies, and small and medium-sized start-up production lines to meet the market demand for high-quality pet food.

 

cat food dog food

 

4. Other Feed Machines for Choose

fish feed machine
Fish Feed Machine
Pet chews machine
Pet Chews Machine
Low-temperature baked pet food
Low-temperature Baked Pet Food

 

 

 

 

Configuration of Machine Dog Food

 

We have tailored 2-3 tons/hour machine dog food for over 20 global clients, complete with a full set of core and auxiliary equipment. The number of collaboration cases for our 2-3 tons/hour machine dog food solutions continues to grow. We always prioritize client needs, comprehensively considering factors such as budget, plant conditions, and raw material characteristics. Combining these with local industry realities, we offer the most adaptive customized solutions.

 

1. Flow Chart of Machine Dog Food

dog food production line

 

2. Main Equipment Description of Machine Dog Food

pet food machine automatic batching

Automatic Weighing And Batching System

 

The automatic weighing and batching system serves as a core automated unit for modern pet food production lines, achieving precise proportional dosing and standardized preparation for various raw materials including fish meal, soybean meal, corn flour, vitamin additives, mineral premixes and grease ingredients. Based on customized feed formulas and production process parameters preset in the industrial control system, the equipment accurately calculates and quantitatively extracts required raw materials from independent silos and storage bins in strict proportions. The entire high-precision dosing process is intelligently regulated by computerized batching scales and PLC control modules, eliminating manual weighing errors and human intervention to ensure standardized pet food manufacturing.

After finishing accurate weighing and batching, all proportioned raw materials are automatically delivered via sealed pipelines and quantitative conveying equipment to the subsequent high-efficiency mixing unit. The system supports sequential feeding and graded mixing according to differences in raw material particle size and density, enabling thorough, uniform and stable blending of coarse and fine materials as well as various nutritional additives. This refined batching and mixing procedure ensures every finished pet food pellet maintains consistent nutritional ratios, uniform compactness and stable product quality.

Milling System

 

The milling system adopts advanced frequency conversion speed regulation technology, supporting stepless and precise adjustment of impeller speed to flexibly and stably control the hammer mill's feeding capacity. This adjustable feeding structure effectively prevents material blockage and uneven milling, improving the stability and controllability of the entire crushing process to meet different fineness standards of various pet food formulas. Fitted with a high-efficiency flat magnetic separator, the system adsorbs and removes iron impurities mixed in soybean meal, corn and grain by-products. It avoids hard metal foreign matter entering the crushing chamber, protects key wearing parts and ensures safe and hygienic pet food production.

The system pulverizes raw materials based on a high-strength impact crushing principle. Qualified raw materials enter the sealed hammer mill chamber and are instantly fragmented by high-speed rotating hammer heads. Fine qualified particles discharge smoothly through screen gaps, while unqualified coarse materials undergo repeated impact, friction, grinding and squeezing inside the chamber until reaching the uniform fineness required for pet food processing. The efficient and stable milling process delivers consistent particle size distribution, providing optimal pre-treatment conditions for subsequent batching, mixing and pelleting, and effectively enhancing the molding quality and structural stability of finished pet food pellets.

grinder for pet food machine
mixer for pet food making machine

Double Shaft Paddle Mixer

 

The double shaft paddle mixer is core mixing equipment tailored for modern pet food production lines, delivering efficient and homogeneous mixing for diverse pet feed raw materials. It adopts two parallel, oppositely rotating transmission shafts fitted with sets of asymmetric paddle blades. During operation, the synchronous dual-shaft rotation drives the paddles to continuously lift, throw, agitate and shear materials. Combined with powerful centrifugal force, material convection and turbulent motion, it eliminates raw material accumulation and layering. This machine is widely applicable for uniform blending of powdery materials like fish meal, soybean meal and flour, granular auxiliaries, as well as liquid additives such as grease and nutritional emulsifiers, covering all conventional proportioning demands for pet food processing.

Compared with traditional single-shaft mixers, its unique double-shaft paddle structure creates a large three-dimensional circulating mixing space inside the chamber, enabling fast, dead-angle-free material mixing. It effectively resolves the common defects of traditional equipment including uneven mixing, low efficiency and excessive material residue, and uniformly integrates trace vitamins, mineral additives and liquid grease with main raw materials for stable and high-quality pet feed production.

Twin Screw Extruder

 

The uniformly mixed powder materials are quantitatively delivered to the granulation system's preconditioning mixer for sufficient humidification and high-temperature steam preheating, which softens material texture and preliminarily gelatinizes starch components. Fully conditioned materials are stably fed into the twin-screw extruder chamber. Under the continuous high-temperature and high-pressure extrusion environment in the barrel, material moisture quickly converts into high-pressure steam. When materials are extruded through the precision die plate, the sudden pressure drop triggers sharp expansion of internal water vapor to form a porous feed structure.

This twin-screw extruder is equipped with a professional preconditioner to realize raw material low-temperature precooking and uniform moisture adjustment in advance, greatly improving material maturation and extrusion stability. It adopts an independent circulating oil cooling system to continuously dissipate gearbox heat, stabilize internal operating temperature, prevent overheating failure during long-term high-load operation, and extend the service life of key transmission components. A high-precision oil filter effectively intercepts fine dust and impurities in lubricating oil, ensuring clean circulation and reliable protection for gears and core parts.

Furthermore, the machine supports flexible replacement of diverse screw combinations to adjust extrusion shear force and material residence time, adapting to diversified raw materials and different pet feed formula requirements. The extrusion barrel is embedded with a high-hardness, corrosion-resistant and wear-resistant alloy liner, which reduces equipment abrasion during processing and ensures long-term, stable continuous production.

cat food extruder
steam dryer for pet food line

Steam Dryer

 

A circulating fan and dehumidifying fan are installed on the top of the dryer chamber. The circulating fan promotes uniform hot air flow inside the chamber, while the dehumidifying fan timely discharges water vapor evaporated from pet food pellets. This dual-fan structure maintains consistent temperature distribution throughout the drying chamber and removes excess moisture steadily, so as to guarantee stable and even drying quality of finished products.

The oven adopts an advanced and well-structured design, integrating mature thermal process technology with the manufacturer's abundant practical experience accumulated from pet feed production projects. During equipment development, engineers precisely calculate the overall oven's heat dissipation area, effective drying area, hot air static pressure and hot air flow velocity. The calculation is implemented based on standardized and rigorous thermodynamic formulas, further optimized and verified by long-term production practice. Such design method delivers more accurate parameter matching and reliable equipment configuration, lowering energy consumption while reducing product cracking and deformation. It supports continuous stable drying operation and improves the physical quality and storage stability of pet food pellets.

Closed Air Duct

 

The closed air duct structure is an important supporting component of the pet feed drying system. Its fully enclosed design guarantees unobstructed circulation of hot air inside the whole air duct loop and minimizes hot air leakage during operation. It maintains a stable wind pressure state within the drying chamber continuously, which provides steady and reliable air pressure conditions for pellet drying and makes the finished pet food pellets easier to achieve uniform drying effect.

 

This structure effectively avoids two common adverse conditions in drying production. On the one hand, it prevents excessive high wind pressure from directly blowing through feed pellets and causing material breakage, particle damage and surface peeling. On the other hand, it avoids insufficient wind pressure with weak penetration capacity, which may lead to uneven internal moisture removal and inconsistent drying degree of products. The closed air duct reduces hot air leakage and heat loss, improves thermal utilization efficiency, lowers production energy consumption, and helps maintain stable product quality and consistent moisture content in continuous pet food drying production.

pet food dryer
pet food vacuum coater

Vacuum Flavoring Machine

 

The vacuum flavoring machine is a dedicated post-processing surface coating unit for premium pet food production, overcoming drawbacks of conventional atmospheric spraying such as low oil absorption, uneven coating and material waste. It delivers a broad, flexible oil addition ratio, supporting liquid grease and flavor dosing from 2% to 25% according to various pet food formulas and nutritional demands. The machine adapts to both standard low-oil daily rations and high-oil functional pet feed, widening formula development flexibility.

Equipped with advanced vacuum negative-pressure batch quantitative spraying technology, it performs precise segmented oil coating. Under vacuum conditions, micro-pores inside and on pellet surfaces expand quickly to fully absorb grease, essences and nutrient liquids instead of merely retaining oil on the pellet surface. The sealed spraying process runs steadily with nearly zero grease loss and avoids oil splashing, material sticking and residual waste typical of ordinary spray equipment.

This machine satisfies high-oil pet food production requirements which regular sprayers cannot achieve. It greatly boosts pellet oil absorption and surface finish, improving palatability and nutrition of finished products. Besides, high-precision oil feeding with minimal waste cuts grease consumption and raw material loss, lowering overall formula and production costs while maintaining consistent flavor and nutrition across every batch of pet food.

Counter-flow Cooler

 

The counter-flow cooler is key post-extrusion equipment for pet food production, addressing uneven cooling, poor moisture removal and pellet deformation of conventional unidirectional cooling systems. Adopting the counter-flow principle, it realizes reverse heat and moisture exchange between materials and cooling air to optimize cooling efficiency and stabilize pellet quality. High-temperature extruded pet food pellets enter the chamber from the top and descend slowly by gravity with controlled discharging.

Low-temperature fresh air is drawn upward from the bottom, generating reverse convection with falling hot pellets. Adequate contact completes heat exchange and moisture evaporation. Cooled pellets with stable temperature and moisture discharge from the bottom, while hot humid air is exhausted at the top. This design eliminates residual heat and secondary moisture absorption seen in forward-flow cooling.

With its counter-flow layout and uniform air distribution, the cooler delivers full and even dehumidification for pet food pellets. It reduces pellet temperature near ambient levels, stabilizes moisture content, improves pellet hardness and surface finish, and extends product shelf life. The equipment runs stably with high cooling efficiency, low power consumption and low breakage rate, supporting continuous high-quality production on pet food processing lines.

Counter-flow cooler for pet food production

3. 5 Tons Per Hour Machine Dog Food Line Configurations

This production line can be divided into a total of 5 sets of production equipment systems and 4 sets of supporting equipment systems:

pet food production line flow chart

 

Production Equipment System

Supporting Equipment System

Raw Materials Receiving and Batching System

Power Distribution Box

Milling and Mixing System

Electrical Control Center

Extrusion System

Air Compressing System

Drying System

Boiler Steam System

Coating and Cooling System

 

Packing System

 

 

 

4. Core Equipment List for Machine Dog Food

Receiving Hopper

1

Bin for extruder

1

Pulse dust collector

1

Pre conditioner

1

Bucket Elevator

1

Twin Screw Extruder

1

Drum Precleaner

1

Control cabinet

1

Permanent magnetic drum

1

Air Conveyor

1

Blender

1

Dryer (steam type)

1

Bucket Elevator

1

Hoister

1

Silo for milling machine

1

Bucket Elevator

1

Hammer mill unit

1

Sifter

1

Checking sieve

1

Flavoring drum

1

Bucket Elevator

1

Oil sprayer

1

Bin for Mixer

1

Control cabinet

1

Pneumatic valve

1

Bucket Elevator

1

Flour Mixer

1

Counterflow cooler

1

Receiving port

1

Bucket Elevator

1

Control cabinet

1

Silo for packing machine

1

Bucket Elevator

1

Packing Machine

1

 

 

 

 

Pet Food Manufacturing Project of Machine Dog Food

 

The countries to which dog food manufacturing machine is exported include Algeria, South Korea, Malaysia, Kazakhstan, Uzbekistan, Georgia, Kuwait, Saudil Arabia, Lebanon, Russia, Belarus, Mexico, Guatemala, Honduras, Venezuela, Chile and so on.

The following section showcases a selection of our representative pet food equipment projects. Each project is tailored to meet specific client requirements, ranging from small to large-scale industrial output. We are committed to providing turnkey solutions that ensure efficiency, consistency, and superior product quality. For detailed technical specifications, project case studies, or a customized quotation for your pet food production needs, please do not hesitate to contact our expert team. We are here to support your business growth with our reliable equipment and professional service.

 

pet food plant

4-5 ton/h Machine Dog Food in Russia

Feed type: dog food

The client previously had a 200kg small machine. With rising market demand and higher quality requirements from his buyers, he required a vacuum spraying unit for pet feed production. After thorough communication, he chose our customized 4–5 ton production line.

After installation now producing dog food and cat food.

Producing the higher quality of pet food.

Cost: approximately $1500,000

Production cycle: 90 days

Delivery time: by sea, 30 days

Installation period: 90 days

Number of employees: 12

Working system: three shift, 8 hours per shift

Project voltage: 380V/50HZ/3P

pet food making equipment

4-5 ton/h Machine Dog Food in Mexico

Feed type: dog food

The customer's existing feed plant engineering products are mainly chicken feed, In order to adapt to the changes in market demand, add new equipment such as pet food extruder, pet food dryer, flavoring machine and cooler, etc., and build a new 4-5 ton/h extruded pet food plant. After the transformation is completed, the whole plant feeds' total production capacity remains unchanged

Cost: approximately $700,000

Production cycle: 70 days

Delivery time: by sea, 55 days

Installation period: 60 days

Number of employees: 6

Working system: two shift, 8 hours per shift

Project voltage: 380V/50HZ/3P

dog food machine

4-5 ton/h Machine Dog Food in Malaysia

Feed type: cat food

It is worth mentioning that all the engineering content was undertaken by Bright Machinery. The feed mill works 300 days a year, 8 hours per shift. There are many highlights of this extruded aquatic 4t/h floating fish extruded feed plant project. During the construction process, not only the advanced twin screw extruder feed technology was introduced into the local area, but also the steam dryer saved the electricity, and be assured of the cat food machine project.

Cost: approximately $1000,000

Production cycle: 75 days

Delivery time: by sea, 20 days

Installation period: 70 days

Number of employees: 8

Working system: two shift, 8 hours per shift

Project voltage: 380V/50HZ/3P

pet food equipment

4-5 ton/h Machine Dog Food in Kenya

Feed type: dog food

After the completion of this dog food processing line, it mainly produces extruded feed for dog.

Initially, this customer used a single-screw extruder, but its instability and susceptibility to wear made it unsuitable for their needs. They then visited our factory and ordered a twin-screw extruder. It has been in use for six years now, and production has been consistently stable.

Cost: approximately $1800,000

Production cycle: 90 days

Delivery time: by sea, 60 days

Installation period: 90 days

Number of employees: 12

Working system: three shift, 8 hours per shift

Project voltage: 380V/50HZ/3P

dog food extruder

4-5 ton/h Machine Pet Food in Iraq

Feed type: cat food

The primary focus of production is cat food, along with a certain amount of fish feed.

Initially, the client had no prior experience in this industry; after conducting over a year of research, he made a special trip to our facility for an on-site inspection. We performed live machine demonstrations for him, and our engineers subsequently modified the proposed solution based on his specific requirements, ultimately customizing this entire system to fit the layout of his factory.

Cost: approximately $1500,000

Production cycle: 90 days

Delivery time: by sea, 60 days

Installation period: 75 days

Number of employees: 8

Working system: three shift, 8 hours per shift

Project voltage: 380V/50HZ/3P

pet food extruder

4-5 ton/h Machine Dog Food in Hungary

Feed type: dog food

This project marked our first major undertaking in Europe. The client evaluated numerous manufacturers and engaged in discussions with us for nearly two years, during which the proposed solutions and quotations were revised more than twenty times. Ultimately, our proposal was selected, and the equipment has now been in operation for seven years.

Cost: approximately $1700,000

Production cycle: 90 days

Delivery time: by sea, 60 days

Installation period: 90 days

Number of employees: 12

Working system: three shift, 8 hours per shift

Project voltage: 380V/50HZ/3P

 

 

 

The Cost of Machine Dog Food

 

The equipment price of a 100-15000kg/h pet food making machine is usually between 30,000-5000,000 USD. This price range is based on a large number of our production line quotations. However, there are always many special custom designs and equipment configurations, and the price may be higher or lower than this range. So this price range is for most projects, not for all cases.

If you want to get an accurate equipment quotation and process design, please contact us directly and tell us your needs. Our engineers will customize a satisfactory solution for you.

 

Production Scale

Model

Cost (USD)

Total Power (KW/H)

Equipment Floor Area (㎡)

Installation Cycle (Days)

100-150kg/h

65

30000-50000

70-100

100-200

7--10

200-250kg/h

70

40000-80000

100-150

200-300

10--15

300-500kg/h

75

50000-90000

145-210

300-500

15-20

600-800kg/h

85

60000-100000

155-220

500-800

15-20

8000-1000 kg/h

90

100000-150000

200-300

800-1000

20-25

1200-1500 kg/h

95

150000-250000

240-320

1000-1500

25-30

1500-2000 kg/h

100

200000-300000

280-360

1000-2000

25-30

2000-3000kg/h

110

400000-800000

400-500

1500-2000

30-50

3000-4000kg/h

120

800000-1200000

600-700

2000-3000

45-75

4000-5000kg/h

132

1200000-1600000

700-800

3000-5000

60-90

9000-10000kg/h

155

2000000-3000000

800-1000

5000-8000

90-120

140000-15000kg/h

175

4000000-5000000

1000-1200

8000-10000

90-120

 

Different Capacities of Machine Dog Food to Choose

100-150kg per hour Machine Dog Food
100-150kg/h
200-260kg per hour Machine Dog Food
200-250kg/h
300-500kg per hour Machine Dog Food
300-500kg/h
600-800kg per hour Machine Dog Food
600-800kg/h
800-1000kg per hour Machine Dog Food
800-1000kg/h
1200-1500kg per hour Machine Dog Food
1200-1500kg/h
1500-2000kg per hour Machine Dog Food
1500-2000kg/h
2000-3000kg per hour Machine Dog Food
2000-3000kg/h
3000-4000kg per hour Machine Dog Food
3000-4000kg/h
4000-5000kg per hour Machine Dog Food
4000-5000kg/h
9000-12000kg per hour Machine Dog Food
9000-10000kg/h
14000-15000kg per hour Machine Dog Food
14000-15000kg/h

 

Our Service for the Project of Machine Dog Food

1. Pre-sales Service

We provide equipment production cost analysis and factory site selection advice, and customize quotation plans based on production capacity or budget targets. We also offer professional design services such as workshop layout diagrams, equipment installation diagrams, and water and electricity pipeline diagrams, providing comprehensive pre-sales support for project planning and implementation.

 

2. In-sales Service

We independently complete the entire manufacturing process of equipment, including CNC cutting, sheet metal bending, welding, and assembly, strictly controlling the quality of each process. Before delivery, we conduct a 72-hour no-load test and on-site trial production to ensure production capacity meets standards. We provide rust prevention treatment, export standard fumigation-free wooden crate packaging, container shipping, and securing solutions, and arrange a professional team to complete transportation and on-site installation and commissioning, ensuring the equipment is installed correctly and operates normally.

 

3. After-sales Service

We provide practical training for on-site operators, enabling them to independently complete equipment startup, operation, inspection, shutdown, and maintenance, and pass the assessment. We also provide continuous on-site technical support according to customer needs and offer lifetime after-sales service to ensure long-term stable use of the equipment.

 

 

 

 

 

FAQ of Machine Dog Food

 

  • 01
    Q: What is the typical lifespan of your machine dog food, and what factors influence it?
     
    A: Our machinery is engineered for long-term durability, with an expected operational lifespan of 10-15 years under proper maintenance. Key factors influencing longevity include the regularity of scheduled maintenance, the quality of spare parts used, and the operational conditions such as production hours and raw material abrasiveness. We provide a comprehensive maintenance manual and support to help you maximize equipment life and performance.
  • 02
    Q: How energy-efficient is your extrusion and drying equipment?
     
    A: Our latest generation of extruders and dryers incorporates advanced energy-saving technologies. Features like variable frequency drives (VFDs) on motors, optimized thermal insulation, and heat recovery systems significantly reduce power and steam consumption compared to conventional models. We can provide specific energy consumption data based on your desired capacity and product type to help you calculate operational costs accurately.
  • 03
    Q: Can your production line handle specialized diets, such as grain-free or high-meat formulas?
     
    A: Absolutely. Our extrusion systems are designed with versatility in mind. They are capable of processing high-protein, high-fat recipes, as well as formulas with alternative ingredients like legumes or sweet potatoes for grain-free diets. We adjust parameters like preconditioning, screw configuration, and cutter design to ensure proper texture, shape integrity, and nutritional retention for these specialized products.
  • 04
    Q: What kind of factory layout and utility requirements are needed for setting up a complete line?
     
    A: Setting up a line requires careful planning of space, power, water, and steam. A typical medium-capacity line needs a minimum clear floor space of approximately 500-800 square meters with adequate height. Key utility requirements usually include a stable three-phase electrical supply (voltage as per your country), a reliable water source for preconditioning and cooling, and a boiler for steam generation. Our engineers provide detailed layout drawings and utility specifications during the project planning phase.
  • 05
    Q: Do you offer automation and control system options for the production line?
     
    A: Yes, we offer varying levels of automation, from semi-automatic control panels to fully integrated PLC (Programmable Logic Controller) systems with touchscreen HMIs (Human-Machine Interfaces). Advanced systems allow for centralized monitoring of all processes - from batching to packaging - enabling precise control over parameters like temperature, speed, and moisture. This improves consistency, reduces manual error, and enhances overall production efficiency.

 

 

Hot Tags: machine dog food, China machine dog food manufacturers, suppliers, factory, Dog Food Making Machine, Dog Food Manufacturing Machine, Dog Food Pellet Machine, Machine Dog Food, Pet Food Extruder, Pet Food Machine

Send Inquiry

Send Inquiry